1. Measure the area to determine the exact placement of your sign letters. Make sure the area is clean and free of dust by wiping the surface with a clean, dry cloth. Always double check the pattern for accuracy before starting. Double check that all sign letters were delivered. Position the spacing tape on the wall and secure one end with masking tape. Unroll, level and tape the other end. Spacing tape shows the general position of each sign letter and is available free upon request. What is spacing Tape?

2. Screw Pads on to each letter

3. Apply silicone to all of the pads on the first sign letter. Position the sign letter on the wall where indicated on the spacing tape.

4. Tape the sign letter to the wall with several strips of masking tape. Adjust as needed. Push sign letters against the wall to insure a good adhesive bond. Continue with the remainder of the sign letters, and allow the silicone to cure for at least 10 minutes before removing the masking tape. Overnight curing is recommended if possible.